Errors
      Back to home
      1. Help Center
      2. Errors

      Landroid S 2017/2018 LED lights warnings

      This tutorial will help you understand what the LED warnings on Landroid S 2017/2018 models are about.

      WR090S, WR091S, WR092S, WR093S, WR094S, WR095S, WR096S, WR100SI, WR101SI, WR101SI.1, WR102SI, WR102SI.1, WR103SI, WR104SI, WR104SI.1, WR105SI, WR105SI.1, WR106SI, WR106SI.1, WR110MI, WR110MI.1, WR115MI.

       

      Triangle is flashing red

      1. Flashing twice per cycle.

      Landroid outside working area. Please bring your Landroid inside the perimeter or read this article "Outside working area" error

       

      2. Flashing 3 times per cycle.

      Wire missing: please refer to this article "Wire missing" error

       

      3. Flashing 4 time per cycle.

      Boundary wire is not properly connected to the charging station: please reverse the wire ends on the charging station

       

      4. Flashing 5 times per cycle.

      Mower can't find the charging station:

      • Charging base is badly placed (not on a flat ground), Landroid doesn’t find pins and doesn’t stop. Check the base positioning and refer to "How to properly place the charging base".
      • Landroid runs out of battery before reaching the charging base. The extended boundary wire should not exceed 350 meters.

       

      5. Led keeps flashing.

      Mower locked: please refer to this article Landroid lock function

       

      Triangle is solid red

      Mower trapped. Please check if something is blocking your Landroid  (holes, woods, etc.)

       

      Triangle is flashing blu

      1. Flashing twice per cycle.

      Mower lifted: please refer to this article "Mower lifted" error

       

      2. Flashing 3 times per cycle.

      Mower upside down: please refer to this article "Mower upside down" error

       

      3. Flashing 4 time per cycle.

      Raining: please refer to this article How to set up rain delay?

       

      Triangle is solid blue

      Wheel motor blocked: please refer to this article Wheel motor blocked error
      or Blade motor fault: please refer to this article Blade motor fault error

      Triangle is flashing red and blue

      Press OK to confirm your command (Start/Home)

       

      Battery is flashing red

      Battery overheating: follow this link https://account.worxlandroid.com/ , access your profile and open a ticket using the form.

      Battery is flashing red twice while charging

      A charging error occurred. Follow this link https://account.worxlandroid.com/ , access your profile and open a ticket using the form.

       

      Battery is flashing green

      Battery is charging

       

      Articles series: