For the Landroid Vision to Successfully Return to the Base Station, Two Interrelated Points Need to Be Understood

These aspects are crucial for its navigation and its ability to return.

1. Position of the Base Station 📍

The Landroid looks for the base station on the right edge of the lawn. It does this after mowing to recharge, after edge cutting, or after a lawn exploration to find its way back home.

2. Visibility of the Base Station QR Code 📷

The Landroid Vision cannot communicate with the base station via Wi-Fi or Bluetooth. Instead, it establishes the connection via the base station's QR code. Therefore, make sure that the Landroid's camera can recognize the base station's QR code while it is looking for the base station.

Review the charging base installation:

Check the Quick Start Guide 📖 or watch the base station installation video 📽️.

🛠️ Installation Examples

Learn more about correct ✔️ and incorrect ❌ installation examples.

• Install the Base Station: Position the base station so that the two charging contacts and the QR code point clockwise to the work area. ⚠️ Please note that the Landroid Vision, due to its right-sided mowing deck, moves counter-clockwise.
  

• Maintain Proper Distances: Ensure the correct installation distances from the base station to the edge, and make sure the camera can recognize the base station's QR code.
  

• Other Factors: Note that other factors such as access to the base station, obstacles like bare spots, detection of the charging contacts on the base, and firmware updates can also be crucial. You can learn more about these in the step-by-step guide below.