Magnetic Strip Setup and Troubleshooting for Landroid Vision

If your Landroid Vision can’t detect the magnetic strips, follow these steps to check the installation, understand the operational modes, and resolve common issues.

Installation

Placement

• Install the strip 32 cm away from protected areas and borders to ensure proper navigation.

Edge Distance

• Keep the strip at least 65 cm from lawn edges for smooth operation.

Securing

• Cut the strip to the required length and secure both ends with pegs.

Operational Modes

Guide Mode (Exploration/Going Home/Edging)

• Acts as a path guide for the mower.

Mowing Mode

• Serves as a boundary to protect off-limits areas.

Issues and Solutions

Crossing Over the Strip

• Ensure the strip isn’t buried too deep; it should be just below the surface.

• Check that there are no gaps between strip segments.

Obstacles Near the Strip

• Clear any obstacles within a 32 cm radius of the strip as recommended in the Quick Start Guide.