Why connect Landroid Vision

Landroid Vision is an IoT (Internet of Things) device. To get full functionality out of your Landroid Vision and keep it always upda- ted to the latest software, it is recommended to be connected to the internet via your Wi-Fi network. The more Landroid Vision mows your lawn, it will become smarter when connected to the internet.

1. Before your start

• Dowload the APP
  Download the free Landroid Vision APP first. Get it from Android or Apple APP stores.

Ensure you have:

• Your Wi-Fi network password/Bluetooth function on your smartphone.

• Landroid Vision Serial Number: It can be found on the label located in the battery compartment.

If you don’t want to type the 20-digit Serial Number, input it by scanning the QR code with your smartphone’s camera.

Check your settings Wi-Fi connection

• Landroid Vision works with 2.4GHz/5GHz Wi-Fi signal.

• Make sure your Landroid Vision is in the same router environ- ment as your smartphone.

• Make sure the distance between your Landroid Vision, smartphone and your router is as close as possible during connection.

Tip: When Landroid Vision moves to an area of your lawn with poor or no Wi-Fi signal, instructions sent from the APP will only be executed when Landroid Vision returns to an area with good signal.

Bluetooth function

• Bluetooth function on your smartphone is activated.

• Make sure your Landroid Vision is within the connectable distance.

2. How to connect to the internet

Activate the “APP-Link” state

• Rotate knob clockwise to select “APP-Link” then press the knob to enter

• Press again the knob to activate the “APP-Link” state, and Landroid Vision will wait for the connection..

Pair Landroid Vision with APP via bluetooth

• When using the Worx Landroid product for the first time, create an account and log in.

• Use the app to scan the QR code on Landroid Vision’s label.

• Choose “Wi-Fi” and enter the password. Make sure that this is the Wi-Fi network you want Landroid Vision to connect to and that the signal is strong in your lawn.

• Tap “Connect” and wait for a moment. When the Landroid Vision’s screen displays “Wi-Fi Connected,” the setup is complete.

Activate the “APP-Link” state (For WR202E)

• Press and hold the [OK/SET] button for 3 seconds until the Wi-Fi icon lights up and starts flashing.

• Press [OK/SET] again to confirm. "APP" will appear on the screen, and Landroid Vision will enter pairing standby mode.

• Choose “Wi-Fi” and enter the password. Make sure that this is the Wi-Fi network you want Landroid Vision to connect to and that the signal is strong in your lawn.

For WR202E:

• Tap “Connect” and wait for a moment. When the screen displays “SUccESS”, the setup is complete.