Skip to Content
Landroid Vision Error and Status Messages
E13 | Camera Error: X | Camera Error
Summary: What solves the problem?
The E 13 error indicates a camera failure. This may be due to a loose connection, an open cover, or outdated firmware.
Try this solution
E13 | Camera Error: X | Camera Error
If your robot display shows “Mowing” or “Home”, but the robot is not moving, it may be caused by a disconnected or inactive camera. This can often be fixed by checking the camera cable and restarting the robot.
Possible Cause
The internal camera is disconnected or not working properly.
What You Can Do
Check the camera cable (harness):
Open the camera cover of the robot
Disconnect and Reconnect it gently
Check the camera cover:
Make sure the camera cover is closed tightly
Restart and update firmware:
Turn off the robot, wait a few seconds, then turn it back on
Update to firmware 1.2.33 or newer
On this page